torx螺丝专利权

A. TORX T40内梅花孔径是多少

TORX T40内梅花孔径是6.65mm。40是梅花头上点到点的距离，为0.4英寸,即10.16mm,与扭矩回有关，最大扭矩为3.70 to 4.50 Nm。

TORX为内梅花答头螺钉的一种型号。由六个椭圆形几何结构的凸齿组成，能够承受更大的扭力，使螺丝起子的使用寿命更长，并能消除螺 丝起子打滑的可能性。

B. TORX®是否汲及专利权

是否涉及专利权，可在国家知识产权局网站查询。

C. SCREW TAPTITE 5X25 MRT-TT TORX是什么意思请高人解答，谢谢！！

表示一种规格的螺钉吧 螺纹为M5的，螺纹长度为25mm

D. 飞利浦头型螺丝这个代表什么意思phillips

那不是飞利浦螺丝,Phillips screw ;是十字槽螺钉，PH25的意思是用25号冲针；也就是说十字槽的型号是25#的； 详细如下： Phillips screw ['filips] [skru] Created by Henry F. Phillips, the Phillips screw drive was purposely designed to cam out when the screw stalled, to prevent the fastener damaging the work or the head, instead damaging the driver. This was caused by the relative difficulty in building torque limiting into the early drivers. To cam out (or cam-out) is a process by which a screwdriver slips out of the head of a screw being driven once the torque required to turn the screw exceeds a certain amount. Frequently, camming out damages the screw, and possibly also the screwdriver, and should normally be avoided. The Phillips head screw and screwdriver combination was designed specifically to cam out, as at the time of its invention torque-sensing automatic screwdrivers did not exist. The Phillips design is auto-centering, that is, the screw does not slip off the screwdriver, unlike a normal slotted-head (flat-head) screws, but cams out once the screw has been driven home. These properties were used to speed up automobile proction in the USA in the early years of the instry. In recent years, automated manufacturing insertion tools can now precisely sense fastener torque. Consequently, it is typical for computer parts, automobiles, and other highly-engineered procts, to be assembled with Torx or Pozidriv head screws, which have been specifically designed not to cam out.

E. TORX螺丝及刀头规格

Torx 头螺丝:即梅花头螺钉;TX10,数字10是梅花头上点到点的距离为0.107英寸即2.74mm,与扭矩有关,最大扭回矩为3.70 to 4.50 N m。
螺答丝是利用物体的斜面圆形旋转和摩擦力的物理学和数学原理，循序渐进地紧固器物机件的工具。螺丝是紧固件的通用说法，日常口头语。螺丝为日常生活中不可或缺的工业必需品：如照相机、眼镜、钟表、电子等使用的极小的螺丝；电视、电气制品、乐器、家具等的一般螺丝；至于工程、建筑、桥梁则使用大型螺丝、螺帽；交通器具、飞机、电车、汽车等则为大小螺丝并用。螺丝在工业上负有重要任务，只要地球上存在着工业，则螺丝的功能永远重要。螺丝是千百年来人们生产生活中的共同发明，按照应用领域来看，它是人类的第一大发明。

F. Torx 头螺丝

Torx 头螺丝:即梅花头螺钉;TX10,数字10是梅花头上点到点的距离为0.107英寸即2.74mm,与扭矩有关,最大扭矩为3.70 to 4.50 N m

TORX, developed by Camcar LLC of Acument Global Technologies (formerly Camcar Textron), is the trademark for a type of screw head characterized by a 6-point star-shaped pattern (in the same way that slotted heads, Phillips, Hex, and Robertson have flat, ×-shaped, hexagonal, and square tips, respectively). People unfamiliar with the trademark generally use the term star, as in star screwdriver or star bits. The generic name is hexalobular internal driving feature and is standardised by the International Organization for Standardization as ISO 10664.

TORX head sizes are described using the capital letter "T", followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Common sizes include T10, T15 and T25, although they reach as high as T100. A sample chart is available here. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. The same series of TORX drivers is used to drive SAE, metric and other thread system fasteners, recing the number of bit sizes required.
详细介绍:http://en.wikipedia.org/wiki/Torx

G. 如何确认及区分TORX PLUS（10IP)螺丝TORX (T10)螺丝

螺丝头部形状不一样，一看就知道了。

H. 见你回答www.acument.com TORX PLUS 里边会有冲头的尺寸图纸 特意找了半天没找到 可否告知 现在十分需要

里边不会有冲头图纸。
本身TORX PLUS 属于人家的专利。
有模具厂商可以做的 ，正常程序是需要专利授权才可以进行开发。

I. 求各种TORX PLUS螺丝的标准参数

TORX PLUS指的只是螺丝的槽型来，这一驱动系自统能有效消除松脱与工具打滑的问题，方便装配。
属于专利，需要资料你可以上ACUMENT公司网站去查找。其他标准参数就完全是根据使用要求了，只要你喜欢，任何螺丝都可以采用TORX PLUS槽型。

J. 12ep external torx plus是啥头

TORX是一种有版权的螺丝针型.

梅花针型.

德士龙的专利