torx螺絲專利權

A. TORX T40內梅花孔徑是多少

TORX T40內梅花孔徑是6.65mm。40是梅花頭上點到點的距離，為0.4英寸,即10.16mm,與扭矩回有關，最大扭矩為3.70 to 4.50 Nm。

TORX為內梅花答頭螺釘的一種型號。由六個橢圓形幾何結構的凸齒組成，能夠承受更大的扭力，使螺絲起子的使用壽命更長，並能消除螺 絲起子打滑的可能性。

B. TORX®是否汲及專利權

是否涉及專利權，可在國家知識產權局網站查詢。

C. SCREW TAPTITE 5X25 MRT-TT TORX是什麼意思請高人解答，謝謝！！

表示一種規格的螺釘吧 螺紋為M5的，螺紋長度為25mm

D. 飛利浦頭型螺絲這個代表什麼意思phillips

那不是飛利浦螺絲,Phillips screw ;是十字槽螺釘，PH25的意思是用25號沖針；也就是說十字槽的型號是25#的； 詳細如下： Phillips screw ['filips] [skru] Created by Henry F. Phillips, the Phillips screw drive was purposely designed to cam out when the screw stalled, to prevent the fastener damaging the work or the head, instead damaging the driver. This was caused by the relative difficulty in building torque limiting into the early drivers. To cam out (or cam-out) is a process by which a screwdriver slips out of the head of a screw being driven once the torque required to turn the screw exceeds a certain amount. Frequently, camming out damages the screw, and possibly also the screwdriver, and should normally be avoided. The Phillips head screw and screwdriver combination was designed specifically to cam out, as at the time of its invention torque-sensing automatic screwdrivers did not exist. The Phillips design is auto-centering, that is, the screw does not slip off the screwdriver, unlike a normal slotted-head (flat-head) screws, but cams out once the screw has been driven home. These properties were used to speed up automobile proction in the USA in the early years of the instry. In recent years, automated manufacturing insertion tools can now precisely sense fastener torque. Consequently, it is typical for computer parts, automobiles, and other highly-engineered procts, to be assembled with Torx or Pozidriv head screws, which have been specifically designed not to cam out.

E. TORX螺絲及刀頭規格

Torx 頭螺絲:即梅花頭螺釘;TX10,數字10是梅花頭上點到點的距離為0.107英寸即2.74mm,與扭矩有關,最大扭回矩為3.70 to 4.50 N m。
螺答絲是利用物體的斜面圓形旋轉和摩擦力的物理學和數學原理，循序漸進地緊固器物機件的工具。螺絲是緊固件的通用說法，日常口頭語。螺絲為日常生活中不可或缺的工業必需品：如照相機、眼鏡、鍾表、電子等使用的極小的螺絲；電視、電氣製品、樂器、傢具等的一般螺絲；至於工程、建築、橋梁則使用大型螺絲、螺帽；交通器具、飛機、電車、汽車等則為大小螺絲並用。螺絲在工業上負有重要任務，只要地球上存在著工業，則螺絲的功能永遠重要。螺絲是千百年來人們生產生活中的共同發明，按照應用領域來看，它是人類的第一大發明。

F. Torx 頭螺絲

Torx 頭螺絲:即梅花頭螺釘;TX10,數字10是梅花頭上點到點的距離為0.107英寸即2.74mm,與扭矩有關,最大扭矩為3.70 to 4.50 N m

TORX, developed by Camcar LLC of Acument Global Technologies (formerly Camcar Textron), is the trademark for a type of screw head characterized by a 6-point star-shaped pattern (in the same way that slotted heads, Phillips, Hex, and Robertson have flat, ×-shaped, hexagonal, and square tips, respectively). People unfamiliar with the trademark generally use the term star, as in star screwdriver or star bits. The generic name is hexalobular internal driving feature and is standardised by the International Organization for Standardization as ISO 10664.

TORX head sizes are described using the capital letter "T", followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Common sizes include T10, T15 and T25, although they reach as high as T100. A sample chart is available here. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. The same series of TORX drivers is used to drive SAE, metric and other thread system fasteners, recing the number of bit sizes required.
詳細介紹:http://en.wikipedia.org/wiki/Torx

G. 如何確認及區分TORX PLUS（10IP)螺絲TORX (T10)螺絲

螺絲頭部形狀不一樣，一看就知道了。

H. 見你回答www.acument.com TORX PLUS 里邊會有沖頭的尺寸圖紙 特意找了半天沒找到 可否告知 現在十分需要

里邊不會有沖頭圖紙。
本身TORX PLUS 屬於人家的專利。
有模具廠商可以做的 ，正常程序是需要專利授權才可以進行開發。

I. 求各種TORX PLUS螺絲的標准參數

TORX PLUS指的只是螺絲的槽型來，這一驅動系自統能有效消除松脫與工具打滑的問題，方便裝配。
屬於專利，需要資料你可以上ACUMENT公司網站去查找。其他標准參數就完全是根據使用要求了，只要你喜歡，任何螺絲都可以採用TORX PLUS槽型。

J. 12ep external torx plus是啥頭

TORX是一種有版權的螺絲針型.

梅花針型.

德士龍的專利